B+W Engineering and Design

LOS ANGELES CIVIL AND STRUCTURAL ENGINEERING COMPANY

B+W Engineering and Design specializes in hillside grading for large custom homes in Los Angeles County. B+W has worked on large multi-unit apartments, multi-unit condos, mixed-use, and commercial properties for a variety of clients; including developers, property owners, real estate companies, and chain stores.

MISSION STATEMENT

To do the best job that we can.

CORE VALUES

We are honest about realistic deadlines for your project.

WHY CHOOSE US

We strive to meet client deadlines.

Projects Big and Small B+W Engineering and Design does them all!

Specializes in Hillside grading for single family residential throughout Los Angeles.

C-SHEETS

---

A Civil Engineering plan (designated as “C” Sheets) shall be required for all new development constructing improvements within the public right-of-way. “C” Sheets shall be submitted separately from the Building Permit plan set for review by the Department of Public Works, concurrently with Building Department review.

EROSION CONTROL PLANS

---

Wet Weather Erosion Control Plans show the minimization of the areas of disturbed soils and the duration of exposure during construction. This assures grading work on private or public projects does not result in soils or other material being washed from the construction site onto other properties or into water courses.

EXCAVATION PLANS

---

Excavation Plans show limits of the excavation (cut slopes, shoring, or a combination of both), adjacent streets and/or alleys with dimensions, and cross sections at various locations to show excavation details.

GRADING PLANS

---

Grading Plans shall include; property lines including public right-of-way to centerline of the street, all fully dimensioned, proposed building footprint and all structures, topographic survey of the private lot and the public right-of-way, sidewalks, curbs and gutters, handicap ramps, edge of pavement, parkways and driveways, storm drain devices including curb outlets, catch basins, on-site and off-site drainage with area drains, roof drains and flow direction.

LID - LOW IMPACT DEVELOPMENT

---

LID is a stormwater management strategy that seeks to mitigate the impacts of increases in runoff and stormwater pollution as close to the source as possible. The use of natural systems such as infiltration, evapotranspiration, and use of stormwater are promoted by a set of design approaches and Best Management Practices (BMPs).

RETAINING WALL PLANS

---

Structural Engineering is a specialty within the Civil Engineering field that analyzes and designs a structure such as a building, foundation plans or retaining wall plans. Safety is important as these structures are often subjected to extreme forces such as temperature, weather, dynamic loads, and earthquakes.

SUMP PUMP DESIGN AND CALCULATIONS

---

Design Sump Pump systems and calculations to convey stormwater from the existing property to the street. A sump is defined as a low area which prevents the free passage of water, and results in flooding of streets or private property. Generally, gravity flow drainage facilities may be installed for sumps; however, there are some drainage situations which would require the use of a sump pump.

SUSMP - STANDARD URBAN STORMWATER MITIGATION PLANS

---

SUSMP, or Standard Urban Stormwater Mitigation Plan, was developed to address stormwater pollution from new developments and redevelopment projects.

A COMBINATION OF COMMERCIAL AND RESIDENTIAL PROPERTIES THROUGH THE YEARS.

A Civil and Structural Engineering company located in the Los Angeles area.

B+W strives hard to meet our clients’ rush deadlines for a reasonable price and that shows with our satisfied repeat clientele. Whether you are putting in a new deck, adding to an existing building structure, or have a vacant lot that requires grading and drainage for a completely new building structure, contact us.

SEND MESSAGE